Pipe Fittings for Garage Pak Compressed Air Systems |
|
| Fax us a drawing of your garage and we will
prepare a quote for you within 24 hours: (877) 236-6076 |
| |
| |
|
Click to Enlarge |
45 Degree
Elbow
Fittings are designed specifically for use with Garage Pak piping
systems. Visit our online store to select your specific size.
Available in 1/2", 7/8", 1-1/2", 2-1/2",
3",
and 4” sizes.
  |
|
Click to Enlarge |
90 Degree
Elbow
Fittings may only be used with Garage Pak pipe and are not designed
to function with any other pipe.
Available in 1/2", 7/8", 1-1/2", 2-1/2", 3",
and 4” sizes.
|
|
Click to Enlarge |
Equal Tee Connector
Garage Pak equal tee connector fittings. Use equal tees for
branch lines and air drops.
Available in 1/2", 7/8", 1-1/2", 2-1/2", 3",
and 4” sizes.
|
|
Click to Enlarge |
Pipe to Pipe
Drop Bracket
Available in several sizes, compressed air pipe drop brackets are
used to saddle the Garage-Pak piping and create a new drop.
Available in various sizes.
|
|
Click to Enlarge |
Push to Connect
Ball Valve
Garge-Pak 1/2 - 1.5 inch Push To Connect vented ball valves are
supplied with a 6mm Compression Plug to vent, and purge your system.
This fitting
is 100% removable and reusable.
Available in 1/2", 7/8", 1-1/2", 2-1/2", 3",
and 4” sizes.
|
|
Click to Enlarge |
Threaded
Drop Bracket
Fittings may only be used with Garage Pak pipe. They will not work
with any other pipe.
Available in 1/2", 7/8", 1-1/2", 2-1/2", 3",
and 4” sizes.
|
|
Click to Enlarge |
Threaded
Male Connectors
1" pipe to 1/2" NPT male threaded connector fitting.
Fittings may only be used with Garage Pak pipe. They will not work
with any other pipe.
Also available in 1/2", 1-1/2", 2-1/2", 3" and
4" pipe sizes and thread sizes from 1/4" NPT to 3"
NPT.
|
|
Click to Enlarge |
1/2" - NPT
Stem Fitting
1/2" NPT Stem fitting plugs into Garage Pak pipe fittings to
provide a 1/2" NPT male threaded outlet.
Available in 1/2",
7/8", 1-1/2", 2-1/2", 3",
and 4” sizes.
|
|
Click to Enlarge |
Two Port Wall Bracket
The Transair 2-port wall bracket is used to terminate an air pipe
drop.
The wall bracket has two 1/2" NPT female connections for air
tool connections.
Product is also available in 1/2" pipe size.
|
|
Click to Enlarge |
Union: Equal Pipe Connector
The Transair pipe-to-pipe union connector is used to join two pipes
of the same diameter.
Available in 1/2", 7/8", 1-1/2", 2-1/2", 3",
and 4” sizes.
|
|
Click to Enlarge |
Vented End Cap
The Transair vented end cap is used to terminate a pipe run. It is
supplied with a 5/32" push-to-connect plug.
Available in 1/2", 7/8", 1-1/2", 2-1/2", 3",
and 4” sizes.
|
| |
|
|
| |
|
